Page Comparison

Cartridges Involved

This Configuration element involves the following Cartridges.

Info
Note: Not all cartridges are available for all CMC models.

...

Current Bevel Type
Select the desired Cartridge Type Tab. Select the desired bevel type from the Current Bevel Type dropdown control. Select Current Bevel Type-Front of Mat if it is being cut from the front of the mat.

Info
To adjust, click plus/minus on the field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved.

Image Removed

Image Modified

Info
To adjust, click plus/minus on the field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved.

Image Removed

Image Modified

Use the Troubleshooting Configurations to fine-tune for Bumps/Feathers in an Oval Opening.

Use the Circle/Oval Rotation Utility to fine-tune specific sizes of circles/ovals for Feathers and Bumps.