Versions Compared

Version Old Version 16 New Version 17
Changes made by

dani.simmonds

dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Cartridges Involved

This Configuration element involves the following Cartridges.

Info

Note: Not all cartridges are available for all CMC models.

Crease Cartridge Configurations

The Crease Cartridge creases the material to make folding it easier when making Boxes.

Crease Tab

Info
Below is a list of support documentation for editing the configurations of

  • Select the Crease Cartridge

on the Crease Tab

  • .

Image Modified

Crease Exterior Backup is too Long

Problem:

  • The Crease Exterior Backup is too Long.

Resolution:

  • Adjust Decrease the Crease Exterior Backup. Select this topic to see information on editing the 

  • See Exterior Backup for additional information.

Info

  • This is viewed from the front of the mat.

Crease Exterior Backup is too Short

Problem:

  • The Crease Exterior Backup is too Short.

Resolution:

Adjust

  • Increase the

Crease

  • Exterior Backup.

Select this topic to see information on editing the Crease 

Info

  • This is viewed from the front of the mat.

Crease Exterior Overcut is too Long

Problem:

  • The Crease Exterior Overcut is applied too Long.

Resolution:

  • Adjust Decrease the Crease Exterior Overcut. Select this topic to see information on editing the Crease 

  • See Exterior Overcutfor additional information.

Info

  • This is viewed from the front of the mat.

Crease Exterior Overcut is too Short

Problem:

  • The Crease Exterior Overcut is applied too Short.

Resolution:

  • Adjust Increase the Crease Exterior Overcut. Select this topic to see information on editing the Crease 

  • See Exterior Overcut for additional information.

Info

  • This is viewed from the front of the mat.

Crease is the Wrong Size

Problem:

  • Crease is applied at the Wrong Size.

Resolution:

  • Adjust the Crease Opening Adjustment. Select this topic to see information on editing the Opening AdjustmentIf cut too small, increase the Opening Adjustment.

  • If cut too large, decrease the Opening Adjustment.

  • See Opening Adjustment for additional information.

Info

  • This is viewed from the front of the mat.

Crease is Applied at the Wrong Depth When Using a SKU

Problem:

  • The Crease is applied at the Wrong Depth When Using a SKU.

Resolution:

  • Adjust the Crease Depth Bias. Select this topic to see information on editing the Depth BiasCut too shallow, increase the Depth Bias.

  • Cut too deep, decrease the Depth Bias.

  • See Depth Bias for additional information.

Troubleshooting Button 

Info

  • Select this topic to see information on editing with the Troubleshooting utility to make quick edits to the Configurations for a single object on the Cutting Preview. 

Set Box Defaults

Info

  • Set up the Box Defaults for the Crease cartridge in the Admin Editor section of the software.