Versions Compared

Old Version 13

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 14

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Cartridges Involved

This Configuration element involves the following Cartridges.

Info

Note: Not all cartridges are available for all CMC models.

Tool Configs Section

Info

The Tool Configs on the Configurations Screen displays the global settings for the bevel cartridge tabs. 

Horizontal 

Problem:

  • The opening/object is cut in the wrong place Horizontally.

Resolution:

Adjust the Horizontal Home.

Select this topic to see information on the Horizontal Home which defines the global horizontal placement of objects cut with the blade cartridges. 

For the Horizontal Home for non-blade cartridges, see Horizontal Adjustment.

Vertical 

Problem:

  • The opening/object is cut in the wrong place Vertically.

Resolution:

  • Adjust the Vertical Home.

Select this topic to see information on the Vertical Home which defines the global vertical placement of objects cut with the blade cartridges. 

For the Vertical Home for non-blade cartridges, see Vertical Adjustment.

Depth Bias 

Problem:

  • The opening/object is cut at the wrong depth when a SKU has been selected.

Resolution:

  • Adjust the Depth Bias.

Select this topic to see information on the Depth Bias which is used to calculate the proper blade depth when a SKU has been selected.

Plunge Count 

Problem:

  • The opening/object does not pause for a blade change while cutting.

Resolution:

  • Adjust the Plunge Count.

Select this topic to see information on the Plunge Count, which is the number of plunges for this particular blade cartridge before pausing for a blade change.

Circle/Oval Rotation Button

Problem:

  • The Circle/Oval cuts with a Feather/Bump.

Resolution:

  • Use the Circle/Oval Rotation Utility to correct for Feathers/Bumps.

Select this topic to see information on the Circle/Oval Rotation Utility to adjust the oval rotation for different size ovals.