Content Comparison

Increase the Exterior Overcut if the Overcut is cut too small.

Decrease the Exterior Overcut if the Overcut is cut too long

Exterior Overcut Definition

The Exterior Overcut controls where the blade retracts retracts from the matboard on the exterior cuts.
Exterior Cuts cut into the matboard, not the fallout.
The Exterior Overcut field is marked with a Red Arrow.

Panel

Increase the Exterior Overcut if the Overcut is cut too small.

Decrease the Exterior Overcut if the Overcut is cut too long

See V-Groove Exterior Overcut to adjust the Exterior Overcut of the V-Groove.

The inside of the V-Groove cuts first in a clockwise direction. These are internal cuts, which cut into the V-Groove fallout.
The outside of the V-Groove cuts second in a counter-clockwise direction. These are external cuts, which cut into the matboard.

The V-Groove Exterior Overcut Overcut controls where the blade retracts retracts from the matboard on exterior cuts on the outside cut of the V-Groove.
Exterior Cuts cut into the matboard, not the V-Groove fallout.
The V-Groove Exterior Overcut field is marked with a Red Arrow.

Panel

Increase the Interior Overcut if the Overcut is cut too small.

Decrease the Interior Overcut if the Overcut is cut too long

The Interior Overcut controls where the blade retracts retracts from the fallout on interior cuts.
Interior Cuts cut into the fallout, not the matboard.
The Interior Overcut field is marked with a White Arrow.

Panel

Increase the Interior Overcut if the Overcut is cut too small.

Decrease the Interior Overcut if the Overcut is cut too long

See the V-Groove Interior Overcut to adjust the Interior Overcut of the V-Groove.

The inside of the V-Groove cuts first in a clockwise direction. These are internal cuts, which cut into the V-Groove fallout.
The outside of the V-Groove cuts second in a counter-clockwise direction. These are external cuts, which cut into the matboard.

The V-Groove Interior Overcut Overcut controls where the blade retracts retracts from the fallout on interior cuts on the inside cut of the V-Groove.
Interior Cuts cut into the V-Groove fallout, not the matboard.
The V-Groove Interior Overcut field is marked with a White Arrow.

Panel

...