Page Comparison

When you have the box design entered, you can bring it to the Cutting Preview in order to cut it.

• Click on Cut on the Box editor to bring the box design to the Cutting Preview.

• Place the sheet of cardboard or other material onto the CMC. Make sure that the sheet is large enough for the design being cut.

• Align the Head and click Cut.

• Install the Deboss/Crease cartridge when prompted, select the correct blade depth, and click Continue.  

• Install the 90° Cartridge when prompted and click Continue.

• After the design has finished cutting, carefully remove the box design from the sheet.

• For a walk-through on how to assemble the box, click on the Question Mark next to the Box thumbnail to open the Box on-line help page for that particular box.

• Fold the pieces along the Deboss/Crease lines as instructed.

• Some boxes have fold tabs, and some boxes require hot glue or other material to adhere the sides together.

• The box design is finished. This shows the corner protector in place on a corner of a piece of framed artwork.