...
Cutting an Extra Dense Layer with the 90 Degree Cartridge | |
|---|---|
Select the desired layer on the Cutting Preview. Click the Cut Speeds button to open the Cut Speeds. |  |
Click the checkbox for Extra Dense Material. Adjust the slidebar underneath to the desired percentage of cutting speed. For instance, 50% is 50% of the standard cutting speed. Click OK. |  |
Click on the Blade Depth button to open the Blade Depth screen. Change the Blade Depth to the appropriate setting for this matboard. Click OK. |  |
The Cutting Preview displays the Dense layer with a pound sign and indicates that this layer is Extra Dense. |  |
Click Cut the cut the mat and Align the Head if requested. A prompt to adjust the head pressure to the high setting displays. |  |
Pull out the air regulator pressure knob by pulling it to the left. |  |
Turn the air regulator pressure knob clockwise until the marker on the gauge is at the high setting. |  |
Make sure the gauge does not go above 60 psi. |  |
Push the air regulator pressure knob back in by pushing it to the right. Click OK to cut the mat with this setting. | |