...
Cutting an Extra Dense Layer with the 90 Degree Cartridge | |
|---|---|
Select the desired layer on the Cutting Preview. Click the Blade Depth button to open the Blade Depth Screen. |  |
Click the checkbox for Extra Dense Material and change the Blade Depth to the appropriate setting for this matboard. Adjust the slidebar to the percentage of cutting speed. For instance, 50% is 50% of the standard cutting speed. |  |
Click OK. The Cutting Preview displays the Dense layer with a pound sign and indicates that this layer is Extra Dense. |  |
Click Cut the cut the mat and Align the Head if requested. A prompt to adjust the head pressure to the high setting displays. |  |
Pull out the air regulator pressure knob by pulling it to the left. |  |
Turn the air regulator pressure knob clockwise until the marker on the gauge is at the high setting. |  |
Make sure the gauge does not go above 60 psi. |  |
Push the air regulator pressure knob back in by pushing it to the right. Click OK to cut the mat with this setting. | |