Blade Depth ButtonUse the Blade Depth screen to select the Blade Depth for the current layer. | |
|---|---|
Blade Depth Click the Blade Depth Button to open the Blade Depth screen which allows the user to set the software blade depth for the current design. |  |
...
Set As Default | |
|---|---|
Click Set As Default button to set the current Blade Depth value as the Default Blade Depth for the associated Opening or V-Groove field. |  |
Set the Default for the Blade Depth | |
|---|---|
The default setting for the Blade Depth can be set in the Admin > Cutting section. This also sets the values for the preset Blade Depth Quick Select Entries. |  |
Dense Material | |
|---|---|
This is a feature for the VPO Head; not all models have this feature. Click Dense Material if this is dense material and Click OK. When you Click Cut, the Head plunges at the home position and applies the current air pressure. User is prompted to adjust the head pressure to the High Setting. See Also: Adjusting the Air Pressure for Dense Matboard for more information. |  |
Extra Dense Material | |
|---|---|
This is a feature for the VPO Head; not all models have this feature. Click Extra Dense Material if this is extra dense material and you are cutting it with the 90° Cartridge. Adjust the slidebar to the percentage of cutting speed and click OK. For instance, 50% is 50% of the standard cutting speed. When you Click Cut, the Head plunges at the home position and applies the current air pressure. User is prompted to adjust the head pressure to the High Setting. See Also: Adjusting the Air Pressure for Dense Matboard and Cutting an Extra Dense Layer with the 90 Degree Cartridge for more information. |  |
Cartridge and Blade Depth Prompt for CMC Z1 | |
|---|---|
After selecting the desired Blade Depth for the current layer and Aligning the Head if necessary, Click Cut to cut the mat. If the current layer uses a different Cartridge or Blade Depth than the last mat cut, the user will be prompted to change the Cartridge and/or the Blade Depth. |  |
Replace the current Cartridge with the one requested on the Cartridge and Blade Depth Prompt. |  |
Change the Blade Depth Value on the screen by clicking on the -/+ buttons to decrease/increase the Blade Depth Value. The Z1 will automatically adjust the physical Blade Depth of the CMC to this number when you click Continue. Click Continue to cut. |  |
...