Blade Depth ButtonUse the Blade Depth screen to select the Blade Depth for the current layer. | |
|---|---|
Blade Depth Click the Blade Depth Button to open the Blade Depth screen which allows the user to set the software blade depth for the current design. |  |
...
Set As Default | |
|---|---|
Click Set As Default button to set the current Blade Depth value as the Default Blade Depth for the associated Opening or V-Groove field. |  |
Set the Default for the Blade Depth | |
|---|---|
The default setting for the Blade Depth can be set in the Admin > Cutting section. This also sets the values for the preset Blade Depth Quick Select Entries. |  |
...
Cartridge and Blade Depth Prompt for CMC Z1 | |
|---|---|
After selecting the desired Blade Depth for the current layer and Aligning the Head if necessary, Click Cut to cut the mat. If the current layer uses a different Cartridge or requires a different Blade Depth than the last mat cut, the user will be prompted to change the Cartridge and/or the Blade Depth. |  |
Replace the current Cartridge with the one requested on the Cartridge and Blade Depth Prompt. |  |
Change the Blade Depth Value on the screen by clicking on the -/+ buttons to decrease/increase the Blade Depth Value. The Z1 will automatically adjust the physical Blade Depth of the CMC to this number when you click Continue. Click Continue to cut. |  |
Cartridge and Blade Depth Prompt for CMC 8000, 9000 and 9000z | |
|---|---|
After selecting the desired Blade Depth for the current layer and Aligning the Head if necessary, Click Cut to cut the mat. If the current layer uses requires a different different Cartridge or requires a different Blade Depth than the last mat cut, the user will be prompted to change the Cartridge and/or the Blade Depth. |  |
Replace the current Cartridge with the one requested on the Cartridge and Blade Depth Prompt. | |
Change the physical Blade Depth Dial on the Head to the requested depth. Click OK to cut. |  |
...