Cutting Composite Materials | |
|---|---|
Rotate the silver Material Stop up so that the gold colored Composite Material Stop can be used. The Composite Material Stop is offset to compensate for the position of the Composite Cartridge. Place the material to be cut onto the AirGlide, aligning it to the Composite Material Stop. |  |
Turn the speed toggle to fast. |  |
Engage clamp. |  |
Pull the Cut lever down to cut the material. Release clamp. Remove the material. Push the cut lever up to return trolley to the top of the gantry. |  |
Page Comparison
General
Content
Integrations