...
Confirm Level with the Camera Software | |
|---|---|
Make sure that the camera is level by using the camera software to confirm it. | |
Connect the camera to the computer. Install and open the software that came with your camera. If your camera didn’t come with software, use the FrameShop Visualize software (instructions on how to open the software is described in Check Software Measurements) and click on the Take Picture button to open the camera application. Place the print target on the back of the color chart onto the design table and place it so it is centered in the viewing frame. Use the zoom controls to zoom in to the piece of paper, making sure that the edges of the print target are displayed equal distance from the edges of the viewing frame. If they are not, the camera is not level, it is not directly above the work surface, or the work surface itself is not level. |  |
If needed, use the side thumb screw to adjust the level of the camera until the rectangular border around the print target appears rectangular in the camera’s field of view. |  |
...