...
Turn Off Air and Remove Hood | |
|---|---|
Turn off the air supply and remove the upper hood by removing the one screw that holds it in place. | |
Unscrew Air Valve Assembly From the Gantry | |
|---|---|
Locate the Air Valve Assembly at the top left side of the Gantry by standing in front of the Gantry and looking straight through the wires/Air Lines to the back plate of the Gantry. Locate the two Allen Screws holding the Air Valve Assembly in place. | |
Do not adjust the other two screws on the Air Valve Assembly. | |
Use a 7/64” Allen wrench T-Handle to remove the screws securing the Air Valve Assembly to the Gantry. | |
Take note that these screws are tight and may be difficult to remove. | |
...
Last Steps | |
|---|---|
Replace the upper Hood by screwing in the screw that holds it in place. You may have to gently move the Air Lines a bit in order for it to fit snuggly. Turn on the air source. Send back the old Air Valve Assembly to Wizard as directed. You are done. | |