Page Comparison

Versions Compared

Key

This line was added.
This line was removed.
Formatting was changed.

52 Degree V-Groove
The 52 Degree Cartridge cuts the V-Groove with a 52° bevel.

Select the 52 Degree V-Groove Bevel Type

Select the 52° Tab on the Configurations screen.

Select V-Groove from the Current Bevel Type dropdown control.

Select the Area of Concern for V-Grooves Below

V-Groove Cuts in the Wrong Place Horizontally
Select this topic to adjust the Horizontal Home.

V-Groove Cuts in the Wrong Place Vertically
Select this topic to adjust the Vertical Home.

Blade Depth is Incorrect When Using a SKU
Select this topic to adjust the Depth Bias.

Does Not Pause for Blade Change
Select this topic to adjust the Plunge Count.

Circle/Oval Rotation Button Utility
Select this topic to access the Circle/Oval Rotation Utility to adjust the oval rotation for different size ovals.

Exterior Backup is too Long
Select this topic to adjust the Exterior Backup.

Exterior Backup is too Short
Select this topic to adjust the Exterior Backup.

Exterior Overcut is too Long
Select this topic to adjust the Exterior Overcut.

Exterior Overcut is too Short
Select this topic to adjust the Exterior Overcut.

Interior Backup is too Long
Select this topic to adjust the Interior Backup.

Interior Backup is too Short
Select this topic to adjust the Interior Backup.

Interior Overcut is too Long
Select this topic to adjust the Interior Overcut.

Interior Overcut is too Short
Select this topic to adjust the Interior Overcut.

V-Groove Cuts the Wrong Size
Select this topic to adjust the Opening Adjustment.

V-Groove Cuts too Thin
Select this topic to adjust the Width Adjustment.

V-Groove Cuts too Thick
Select this topic to adjust the Width Adjustment.

V-Groove has an Outside Swoop
Select this topic to adjust the Outside Rotation.

V-Groove has an Outside Flare
Select this topic to adjust the Outside Rotation.

V-Groove has an Inside Swoop
Select this topic to adjust the Inside Rotation.

V-Groove has an Inside Flare
Select this topic to adjust the Inside Rotation.

Oval V-Groove has an Outside Bump
Select this topic to adjust the Outside Oval Rotation.

Oval V-Groove has an Outside Feather
Select this topic to adjust the Outside Oval Rotation.

Oval V-Groove has an Inside Bump
Select this topic to adjust the Inside Oval Rotation.

Oval V-Groove has an Inside Feather
Select this topic to adjust the Inside Oval Rotation.

Troubleshooting Button
Use the Troubleshooting utility to make quick edits to the Configurations for a single object on the Cutting Preview.

...