">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 7 Next »

Cut Pattern: Optimized

Set Optimized from the Cut Pattern dropdown control to cut tiled mats bi-directionally, which will zig-zag back and forth when cutting the outside on tiled mats on the CMC Z1 and Z (9000z).

Click the Set Advanced Options button to access the Advanced Outside Options. 

Select Optimized from the Cut Pattern dropdown control.

Click OK.

It will cut the outsides of tiled mats in a bi-directional, zig-zag fashion.

Set the Default for Cutting the Outside 

The default setting for Cutting the Outside can be set in the Admin > Editor section.

Set the Default for 90 Degree Outside Cut

The default setting for 90 Degree Outside can be set in the Admin > Cutting section.

Set the Default for the Advanced Options

The default setting for the Advanced Options can be set in the Admin > Cutting section.

Set the Default for the Cut Pattern

The default setting for the Cut Mode can be set in the Admin > Cutting section. 

  • No labels