You are viewing an old version of this page. View the current version.
Compare with Current View Page History
« Previous Version 23 Next »
The Horizontal Home defines the global Horizontal placement of objects cut with the Blade Cartridges, viewed as cut.
If the Opening is cut Too Far Left, Increase the Horizontal Home.
If the Opening is cut Too Far Right, Decrease the Horizontal Home.
When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.
Click OK and do another test cut.
Continue making adjustments until the desired outcome is achieved.
See Also: Horizontal Adjustment for Non-Bladed Cartridges.