45° Normal Bevel Drop Definition | |
|---|---|
The 45° Normal Bevel Drop is created by cutting into the fallout surface with the blade angled at 45°, thereby slanting the bevel away from the fallout surface. The matboard core is visible from the front. The initial plunge position is determined by the bevel type. The 45° Normal Bevel Drop is created by cutting into the fallout surface with the blade angled at 45°, thereby slanting the bevel away from the fallout surface. The matboard core is visible from the front. The initial plunge position is determined by the bevel type. The Drop is one of the categories within certain opening styles, like the initial section cut of an Open V-Groove. However, it cannot be chosen as a standalone bevel type within Designer. The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut. Select Normal Drop or Normal Drop-Front of Mat from the Current Bevel Type dropdown control to edit this configuration. | |