This FrameShop Online Help System is for an older Version of FrameShop.+">This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Current »

Nesting Software

The Nesting program can be accessed through the Main Screen, the Browse Screen, and on the Cutting Preview.

Main Screen

On the Main Screen, click the Nesting Button.

The Nesting software will open.  

Browse Screen

Click on the Browse Button on the Main Screen. 

On the Browse screen, select the desired mats.

Click on the Nesting Button to bring the designs into the Nesting program. 

Cutting Preview

Bring the desired mat to the Cutting Preview.

Click on the Nesting Button on the Cutting Preview to bring the current design into the Nesting program.

  • No labels