Add Pen Opening

The Pen Cartridge is used to draw onto the surface of the matboard on the CMC to create a design.

Click Add Decorative Line button on the Openings tab.
Select the desired Pen Number.
- The are nine Pens available.

For Additional Information: See Install Pen for information on calibrating each of the pens for use in the Pen Cartridge.

Default Settings: See Admin > Editor for the default settings for the Pen Cartridge.

Pen Definition

The Pen Cartridge is used to draw onto the surface of the matboard on the CMC to create a design.

You can Pen Designs, CutArts, LetterMats and TTFs.

See: Pen Cartridge Configurations

Install Pen Definition

The Install Pen Utility calibrates the Pen Tool for use on the CMC.

The Pen Cartridge draws onto the surface of the matboard to create a design. In addition to templates, you can also Pen CutArts, LetterMats and TTFs.

Use the Install Pen utility to calibrate the system for different Pens.

See: Install Pen: Set the Pen Depth Setting for CMC Z1

See: Install Pen: Set the Pen Depth Setting for CMC Z (9000z) and 9000

The Pen is placed on the Editor.

For Additional Information: See Pen Properties to edit the individual proprietary adjustments available for the Pen.

Adding a Pen With an Object Selected
Click the object you want the Pen placed around. Click Add Decorative Line button on the Openings tab. Select the desired Pen Number. There are nine Pens available. For Additional Information: See Install Pen for information on calibrating each of the pens for use in the Pen Cartridge. Default Settings: See Admin > Editor for the default settings for the Pen Cartridge. Install Pen Definition The Install Pen Utility calibrates the Pen Tool for use on the CMC. The Pen Cartridge draws onto the surface of the matboard to create a design. In addition to templates, you can also Pen CutArts, LetterMats and TTFs. Use the Install Pen utility to calibrate the system for different Pens. See: Install Pen: Set the Pen Depth Setting for CMC Z1 See: Install Pen: Set the Pen Depth Setting for CMC Z (9000z) and 9000
The Pen Offset window will open. Enter the Offset Distance from the selected opening to place the Pen. Click OK. Default Settings: See Admin > Editor for the default settings for the default Deboss/Pen/V-Groove Distance.
The Pen is placed around the opening at the offset distance specified. For Additional Information: See Pen Properties to edit the individual proprietary adjustments available for the Pen.

Search

Click here to check out our new How To section">Click here to check out our new How To section

Add Pen Opening

Add Pen Opening

Adding a Pen With an Object Selected