Remnant Trimming

Select the desired Remnant Trimming direction on the CMC Z1, Z (9000z), 9000 and 8000+ from the Remnant Trimming dropdown control. This will trim off the remaining section of the matboard to make it easier to store the remaining pieces for future use.

Default Settings: See Admin > Cutting for the default settings for Remnant Trimming.

Remnant Trimming Definition

Remnant Trimming feature trims off the remaining portion of the mat Horizontally or Vertically after cutting the design to make storing the leftovers easier.

See: Remnant Trimming Function

Set Advanced Options: Remnant Trimming

Click the Set Advanced Options button on the Cut Preview to access the Advanced Outside Options.

For Additional Information:
Select Options Menu > Cut Outside to cut the outside of the mat.
See /wiki/spaces/FrameShop8x/pages/1942506497 to turn on/off the Outside cut.
See Advanced Outside Options: Enable Outside Cut to turn on/off the Outside cut.

Default Settings:
See Admin > Editor for the default settings for Cutting the Outside.
See Admin > Cutting for the default settings for the Advanced Options.
See Admin > Cutting for the default settings for the Cut Mode.
See Admin > Cutting for the default settings for 90 Degree Outside.
See Admin > Cutting for the default settings for Tiling.
See Admin > Cutting for the default size for the Spacing between designs.
See Admin > Cutting for the default settings for Remnant Trimming.

Make the desired selection for the Remnant Trimming as described below.
Click OK.
The CMC will cut with these settings.

Remnant Trimming Definition

Remnant Trimming feature trims off the remaining portion of the mat Horizontally or Vertically after cutting the design to make storing the leftovers easier.

See: Remnant Trimming Function

Remnant Trimming: Off
Set Remnant Trimming to Off to not cut off the Remnant from the sheet of matboard. Click the Set Advanced Options button on the Cut Preview to access the Advanced Outside Options. Set Remnant Trimming to Off.
The design will cut but Not Trim Off the Remnant that remains from the matboard.

Remnant Trimming: Auto
Set Remnant Trimming to Auto to let the software determine the best direction to cut off the Remnant. Click the Set Advanced Options button on the Cut Preview to access the Advanced Outside Options. Set Remnant Trimming to Auto to let the software determine the optimal direction to cut off the Remnant.
The software will automatically determine the Optimal direction to cut off the Remnant matboard by selecting either Vertically or Horizontally depending upon the design.

Remnant Trimming: Horizontal
Set Remnant Trimming to Horizontal to default to cut the Remnant off horizontally. Click the Set Advanced Options button on the Cut Preview to access the Advanced Outside Options. Set Remnant Trimming to Horizontal.
The design will cut and trim off the Remnant matboard Horizontally.

Remnant Trimming: Vertical
Set Remnant Trimming to Vertical to set the default to cut the Remnant matboard off Vertically. Click the Set Advanced Options button on the Cut Preview to access the Advanced Outside Options. Set Remnant Trimming to Vertical.
The design will cut and trim off the Remnant matboard Vertically.

Search

Click here to check out our new How To section">Click here to check out our new How To section

Remnant Trimming

Remnant Trimming

Set Advanced Options: Remnant Trimming

Remnant Trimming: Off

Remnant Trimming: Auto

Remnant Trimming: Horizontal

Remnant Trimming: Vertical