This FrameShop Online Help System is for an older Version of FrameShop.
The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw
If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.
What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ
FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw
Box 2: Corner Protector: FrameShop Box Editor
- dani.simmonds
Corner Protector | |
|---|---|
This box is meant to be placed on the four corners of framed artwork to protect them during transport while the customer brings it home. | |
Cut out the corner protector at the desired dimension. |  Remove the Cut Box from the CMC |
Fold the protector along the creased edges. |  Fold the Protector Along the Creased Edges |
Fold in the grip toward the center of the box. | |
Fold up the flap on the bottom of the protector. | |
Fold and insert the tab into the flap. | |
Fold and insert the tab into the flap. | |
The corner protector is now assembled. | |
The corner protector can now be inserted over the corner of the framed art. | |