">
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 15 Next »

Cartridges Involved

This Configuration element involves the following Cartridges.

Note: Not all cartridges are available for all CMC models.

Deboss Wide Configurations

The Blue Deboss Wide Cartridge presses a wide stylus into the matboard to create a subtle design.

Select the Deboss Wide Cartridge Type

Select the Deboss Tab on the Configurations screen.  

Select the Wide-Blue cartridge from the Cartridge dropdown control.

Select the Area of Concern for Wide Deboss Below:

Be sure to select the Deboss Wide from the Current Bevel Type dropdown control.

Deboss-Wide is Applied to the Wrong Place Horizontally

Problem:

  • The Deboss-Wide is Applied to the Wrong Place Horizontally.

Resolution:

  • Adjust the Horizontal Adjustment. Select this topic to adjust the Horizontal Adjustment.

  • This is viewed from the front of the mat.

Deboss-Wide is Applied to the Wrong Place Vertically 

Problem:

  • The Deboss-Wide is Applied to the Wrong Place Vertically.

Resolution:

  • Adjust the Vertical Adjustment. Select this topic to adjust the Vertical Adjustment.

  • This is viewed from the front of the mat.

Deboss-Wide is the Wrong Size

Problem:

  • The Deboss-Wide is the Wrong Size.

Resolution:

  • Adjust the Opening Adjustment. Select this topic to adjust the Opening Adjustment.

  • This is viewed from the front of the mat.

Deboss-Wide Applied at the Wrong Depth

Problem:

  • The Deboss-Wide is Applied at the Wrong Depth.

Resolution:

  • Adjust the Depth Setting. Select this topic to adjust the Depth Setting.

Deboss-Wide Cartridge Tears the Mat 

Problem:

  • Deboss-Wide Cartridge Tears the Mat.

Resolution:

  • Adjust the Corner Pause. Select this topic to adjust the Corner Pause. 

Deboss-Wide Lines are too Long

Problem:

  • The Deboss-Wide Lines are too Long.

Resolution:

  • Adjust the Overshoot. Select this topic to adjust the Overshoot.

  • This is viewed from the front of the mat.

Deboss-Wide Lines are too Short 

Problem:

  • The Deboss-Wide Lines are too Short.

Resolution:

  • Adjust the Overshoot. Select this topic to adjust the Overshoot.

  • This is viewed from the front of the mat.

Deboss-Wide Set to Plunge Between Segments

Problem:

  • The Deboss-Wide Set to Plunge Between Segments.

Resolution:

  • Adjust the Plunge. Select this topic to adjust the Plunge between segments.

Troubleshooting Button 

  • No labels