Interior Backup on Drops | |
|---|---|
Cutting from the Front will cut with the face of the mat toward the operator, and can be selected on the Cutting Preview. Configurations cut from the Back will only display the bevel type name with no further label; i.e., Normal Bevel. If you are cutting an element that must be applied to the front of the mat, such as a V-Groove or Pen design, any openings on that layer will also cut from the front and use the Front of Mat configuration item; i.e., Normal Bevel - Front of Mat. So if you are having problems with a Normal Bevel cut on the same layer as a V-Groove, make sure you select Normal Bevel-Front of Mat to edit the configurations for that opening. |  |
Drop Interior Backup Too Long | |
|---|---|
The Interior Backup controls where the Blade Plunges into the Fallout (not the Matboard) on the Interior cuts of Openings. The Interior Cut is where the Blade Plunges or Retracts from the Fallout (not the Matboard). If the Interior Backup is cut Too Long, Decrease the Interior Backup. The Interior Backup field is marked with a Black Arrow on the Configuration screen and the Map illustration.  |  |
Drop Interior Backup Too Short | |
|---|---|
The Interior Backup controls where the Blade Plunges into the Fallout (not the Matboard) on the Interior cuts of Openings. The Interior Cut is where the Blade Plunges or Retracts from the Fallout (not the Matboard). If the Interior Backup is cut Too Short, Increase the Interior Backup. The Interior Backup field is marked with a Black Arrow on the Configuration screen and the Map illustration. | |