">
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 7 Next »

Deboss Wide Cartridge

The Blue Deboss Wide Cartridge presses a wide stylus into the matboard to create a subtle design.

Select the Deboss Wide Cartridge Type

Select the Deboss Tab on the Configurations screen.  

Select the Wide-Blue cartridge from the Cartridge dropdown control.

Select the Area of Concern for Wide Deboss Below:

Be sure to select the Deboss Wide from the Current Bevel Type dropdown control.

Deboss-Wide is Applied to the Wrong Place Horizontally

This is viewed from the front of the mat. Select this topic to adjust the Horizontal Adjustment.

Deboss-Wide is Applied to the Wrong Place Vertically 

This is viewed from the front of the mat. Select this topic to adjust the Vertical Adjustment.

Deboss-Wide is the Wrong Size

This is viewed from the front of the mat. Select this topic to adjust the Opening Adjustment.

Deboss-Wide Applied at the Wrong Depth

Select this topic to adjust the Depth Setting.

Deboss-Wide Cartridge Tears the Mat 

Select this topic to adjust the Corner Pause. 

Deboss-Wide Lines are too Long

This is viewed from the front of the mat. Select this topic to adjust the Overshoot.

Deboss-Wide Lines are too Short 

This is viewed from the front of the mat. Select this topic to adjust the Overshoot.

Deboss-Wide Set to Plunge Between Segments

Select this topic to adjust the Plunge between segments.

Troubleshooting Button 

Use the Troubleshooting utility to make quick edits to the Configurations for a single object on the Cutting Preview. 

  • No labels