This FrameShop Online Help System is for an older Version of FrameShop.+">This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

Storage Box

This box is a clam-shell box, where the top folds and encloses around the bottom piece. This is cut from one piece of material.

Cut out the box at the desired dimension.

Fold the box sections along the creased edges.

Fold in the inner flaps and attach them to the side of the box with hot glue.

Fold in the inner flaps and attach them to the side of the box with hot glue.

Do the same with the other side of the box.

Fold the box in half, tucking the bottom half of the box into the top half to secure the box.

The box is assembled.

  • No labels