">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 27 Current »

Placing Matboard When Cutting from the Back

When the Cut Preview screen indicates that the current layer is to be cut from the Back of the mat, this also determines how to place the matboard onto the CMC. 

  • Have Two Layers of adequate size of disposable matboard under the Mat to be Cut; a Layer can be temporarily removed when cutting thicker matboard.

  • Place the matboard into the left corner of the CMC, making sure that the matboard nestles tightly into the Horizontal and Vertical Clamps.

Backing Board

  • Place Two Sheets of matboard on the CMC behind the sheet of matboard being cut to serve as Backing Boards.

  • When cutting from the Back, make sure the front of the matboard is facing the CMC.

Z1BoardBackOfMatUP2024800.png

Default Settings

  • No labels