You are viewing an old version of this page. View the current version.
Compare with Current View Page History
« Previous Version 4 Current »
Click on the Blade Depth button to open the Blade Depth Screen.
Enter the Blade Depth for the current layer if different than the selected depth.
On the CMC Z1, setting the Blade Depth in the software will automatically set the Blade Depth in the hardware.
The Z1 will automatically adjust the physical Blade Depth of the CMC to this value when you click Continue.
Click Continue to cut.
Optionally, enter the desired Blade Depth in the Blade Depth field.
Optionally, click the Blade Depth Quick Select button which is displayed as the mat corner sample at the top of the screen on the Cut Preview Screen.
Select the desired preset Blade Depth for the current layer from the dropdown control.
The selected Blade Depth will be applied to the current Layer.
See the Blade Depth Field on the Cut Preview for more information on the Blade Depth Entry Field.
See the Blade Depth Button on the Cut Preview for more information on setting the software Blade Depth.
See the Blade Depth Quick Select on the Cut Preview for more information on the Blade Depth Quick Select dropdown control.
See Assign SKU to Layer for more information on Assigning a SKU to a Layer on the Cut Preview to post the correct blade depth for that SKU if it contains a mat thickness.
Default Blade Depths: Cutting Default Setting
Default Opening Blade Depth: Cutting Default Setting
Default V-Groove Blade Depth: Cutting Default Setting
