">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 13 Next »

Selecting the Default Setting to Use the 45° Front Blade Cartridge

Set the 45° Front default settings for the 45 Degree Front Blade Cartridge. 

  • Click on the Admin button in the Admin section of the Main Screen.

  • Click on the Cutting tab to open the Cutting section.

  • Select Change to 45° Front Blade to default to using the 45° Front Blade Cartridge when cutting a design from the front of the mat.

    • Select Change to 45 Degree Front Blade to default to using the standard 45° Front Cartridge to cut the design either from the front or from the back of the mat.

    • Select Use Normal 45 Blade Only to default to using the standard 45° Cartridge to cut the design either from the front or from the back of the mat.

  • Click Save.

  • It will now use the 45° Front Blade Cartridge when you are cutting from the front.

  • No labels