You are viewing an old version of this page. View the current version.
Compare with Current View Page History
« Previous Version 22 Next »
The 45° metal black blade cartridge* is designed to cut 45° bevels on standard 4-ply matboard.
The 45° metal black blade cartridge is labeled 45° on the end.
Use the Configurations screen to adjust how the 45 Degree Cartridge is being cut.
The 45° blade cartridge does not support blade depths above 16.
*Older systems may have a 45° plastic black blade cartridge.
With the desired design on the Cut Preview screen, click the Configurations button to open the Configurations screen.
Select the 45 Degree Cartridge tab to edit the Configurations for the 45 Degree Cartridge.
Select the Bevel Type from the Current Bevel Type dropdown control.
See Editing the 45 Degree Configurations for full instructions on adjusting the Configurations for the 45° Cartridge.
