">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 32 Next »

V-Groove Cuts too Far Up (Not Cutting the Outside)

 Vertical Home for V-Grooves Definition

The Vertical Home defines the global Vertical placement of objects cut with the Blade Cartridges.

If the V-Groove is cut Too Far Up Vertically, Decrease the /wiki/spaces/FrameShop8x/pages/1942498125.

If the V-Groove is cut Too Far Down Vertically, Increase the /wiki/spaces/FrameShop8x/pages/1942498125.

See: /wiki/spaces/FrameShop8x/pages/1942498228

 How to Adjust the Vertical Home

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

V-Groove Cuts too Far Down (Not Cutting the Outside)

 Vertical Home for V-Grooves Definition

The Vertical Home defines the global Vertical placement of objects cut with the Blade Cartridges.

If the V-Groove is cut Too Far Up Vertically, Decrease the /wiki/spaces/FrameShop8x/pages/1942498125.

If the V-Groove is cut Too Far Down Vertically, Increase the /wiki/spaces/FrameShop8x/pages/1942498125.

See: /wiki/spaces/FrameShop8x/pages/1942498228

 How to Adjust the Vertical Home

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

  • No labels