Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 20 Next »

Please box up the following two items for return:

• Head
• Driver Pack
Please see the following removal instructions for each part.

Head Removal

  • Turn off the air.

  • Turn off the computer. Remove the blade.

  • Remove the head hood (held with Phillips screws w/star washers) to make access to the Head Power Plug easier.

  • Unplug the head power plug by gripping the white plug housing firmly (not the flexible cable), and gently rock it back and forth while pulling up.

  • Disconnect the air supply.

  • Disconnect the air line by unscrewing the airline connector.

  • Open the head.

  • Remove the horizontal bolt from head and right hinge on the trolley plate using the 9/64 Allen wrench.

  • If there is no horizontal bolt, remove small Allen screw to the right of right-hand Hinge.

  • Gently slide head right (rocking up and down may help).

  • Head should now slide off left hinge pins.

Removing the Driver Pack

  • Power off the Driver Pack by flipping the toggle on back to “0”.

  • Unplug the Board Cable (large grey or black cable) from the back of the Driver Pack by turning black locking ring and pulling gently.

  • Unplug the power cord.

  • Unplug the USB Cable from the back of the Driver Pack.

  • Return the Driver Pack to Wizard.

Packaging up the Parts

  • Bubble-wrap the head and the Driver Pack and put it in the box.

  • Bubble-wrap the parts.

  • Fill the rest of the box with bubble-wrap/packaging peanuts.

  • Ship the box back to Wizard.

  • Please use the return labels that have been provided. Give the packages to your regular Fed-Ex delivery pickup.

  • If you do not have regular Fed-Ex delivery, call 1-800-GOFEDEX (1-800-463-3339) to arrange pickup.

  • If you have any questions, please contact Christina.Costilla@wizardcutters.com 425-551-4300 x4304.

  • No labels