You are viewing an old version of this page. View the current version.
Compare with Current View Page History
« Previous Version 29 Next »
The Interior Backup controls where the Blade Plunges into the Fallout (not the Matboard) on the Interior Cuts of objects.
The Interior Cut is where the Blade Plunges/Retracts from the Fallout (not the Matboard).
If the Interior Backup is cut Too Long, Decrease the Interior Backup.
If the Interior Backup is cut Too Short, Increase the Interior Backup.
When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.
Click OK and do another test cut.
Continue making adjustments until the desired outcome is achieved.
