">
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 2 Next »

Group Selection of Objects Reverse Bevel

  • Use the Reverse Bevel section in the Template Options Reveals Tab to make the Layer a Reverse Bevel.

  • If the group selection contains any Objects that are not Templates, this section is hidden.

  • Click the RB Button to make all of the layers a Reverse Bevel. 

  • Click the RB Checkbox on the desired layer to make only that layer a Reverse Bevel.

 Reverse Bevel Definition

The Reverse Bevel Opening is created by cutting into the matboard surface with the blade angled at 45°/52°, thereby slanting the bevel under the matboard surface. The matboard core is not visible from the front.

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

Select Reverse Bevel or Reverse Bevel-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.

BevelType45RBSelect70800.jpg

See: 45 Degree Reverse Bevel Opening Configurations

See: 45 Degree Plus Reverse Bevel Opening Configurations

See: 45 Degree Front Reverse Bevel Opening Configurations

See: 52 Degree Reverse Bevel Opening Configurations

  • No labels