">
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 3 Next »

How to Make a Staircase Curve Design

  • This will walk you through using two #201: 4 Staircase designs and merging them together to create a single design.

StairCurveDone800.png

  • Click New Mat Design on the FrameShop Main Page.

  • Click Cancel on the New Openings Screen.

  • On the Openings Tab, bring two template #201: 4 Staircase onto the Editor.

  • NOTE: Selecting different Templates and adjusting their Parameters will give you an unlimited range of creative options.

StairCurveStart800.png

  • Click on the Properties Tab to edit it.

  • Enter the desired size for the two #201: 4 Staircase openings.

    • Remember that we are going to merge the two templates together so keep that in mind when sizing the design.

StairCurveSize800.png

  • Click on the Bottom #201: 4 Staircase opening.

  • In the Rotation field, enter 90 for the degree of Rotation.

  • The #201: 4 Staircase will be rotated 90°.

StairCurveRotate800.png

  • Move each of the #201: 4 Staircase openings into the center of the mat.

StairCurveCenter800.png

  • Select both openings and click the Group Selection button.

StairCurveGroup800.png

  • The two openings should merge where they overlapped.

  • If you need to make an adjustment to the design, click the Group Selection button to unmerge them, then click on the background to unselect them.

  • Re-edit as desired and then regroup them again.

StairCurveGrouped800.png

  • The edited Staircase Curve design is now completed.

  • NOTE: You can repeat this process to merge any two templates together in any configuration as long as they share the same Bevel Type.

StairCurveDone800.png
  • No labels