">

Click here to check out our new How To section">Click here to check out our new How To section

Skip to end of banner Go to start of banner

Not Cutting the Outside Display

Skip to end of metadata

Created by dani.simmonds, last modified on Sept 24, 2024

Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Not Cutting the Outside Display

The Cut Preview will not display nor cut the Outside of the design if the Cut Outside toggle is selected Off.
Toggle the Cut Outside Off and the Cut Preview will display and cut the Outside of the mat.

For Additional Information:
See Matboard Properties in the Design to turn on/off the Outside cut.
Select Options Menu > Cut Outside on the Cut Preview to cut the outside of the mat.
See /wiki/spaces/FrameShop8x/pages/1942506497 on the Cut Preview to turn on/off the Outside cut.
See Enable Outside Cut under Advanced Outside Options on the Cut Preview to toggle on/off the Outside cut.
See Cut Outside Using 90 Degree Tool under Set Advanced Options on the Cut Preview.
See Cut Mode in the Set Advanced Options section on the Cut Preview.
See Shared Edge for the Cut Mode in the Set Advanced Options section on the Cut Preview.
See Full for the Cut Mode in the Set Advanced Options section on the Cut Preview.
See As Designed for the Cut Mode in the Set Advanced Options section on the Cut Preview.
See Remnant Trimming in the Set Advanced Options section on the Cut Preview.

Default Settings:
See Admin > Editor for the default settings for Cutting the Outside.
See Admin > Cutting for the default settings for the Advanced Options.
See Admin > Cutting for the default settings for the Cut Mode.

No labels