This FrameShop Online Help System is for an older Version of FrameShop.+">This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 35 Current »

Oval Rotation

Adjust the Oval Rotation if you are getting Bumps or Feathers on a circle or oval opening.

Select the Bevel Type to be Edited:

Oval Rotation for Openings

Select this topic to see information on editing the Oval Rotation on oval openings. 

Oval Rotation for Drops

Select this topic to see information on editing the Oval Rotation on oval drops.

Oval Rotation for Outside

Select this topic to see information on editing the Oval Rotation on the oval outside cut. 

Oval Rotation for Oval V-Groove

Select this topic to see information on editing the Oval Rotation on oval V-Grooves. 

Rotation for Non-Ovals

Select this topic to see information on editing the Rotation if you are getting Swoops or Flares on a non-oval opening.

  • No labels