">
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 12 Next »

Selecting the Default Setting to Use the 45° Front Blade Cartridge

Set the 45° Front default settings for the 45 Degree Front Blade Cartridge. 

  • Click on the Admin button in the Admin section of the Main Screen.

  • Click on the Cutting tab to open the Cutting section.

  • Select Change to 45° Front Blade to default to using the 45° Front Blade Cartridge when cutting a design from the front of the mat.

    • Select Change to 45 Degree Front Blade to default to using the standard 45° Front Cartridge to cut the design either from the front or from the back of the mat.

    • Select Use Normal 45 Blade Only to default to using the standard 45° Cartridge to cut the design either from the front or from the back of the mat.

  • Click Save.

  • It will now use the 45° Front Blade Cartridge when you are cutting from the front.

  • No labels