How Tosectionat:[HowTo...]">Check out our new How To section at: How To...

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 16 Current »

Change to the Debossing Tool Cartridge

  • The Deboss tool cartridges are labeled with the Deboss symbol on the end.  

  • The thin Deboss cartridge is white, medium is red, and wide is blue. 

  • Push blade cartridge release down to eject the current blade cartridge.

  • Turn the new cartridge over and reinsert into the head with the blade facing the CMC board and the notch on the back of the cartridge facing the head, until it clicks into place. It can only be inserted one way.

  • All of the Deboss tool cartridges are installed in the same manner.

  • No labels