">
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 46 Next »

The Depth Bias Formula

[(Default Depth) - 10]

  • For example, if the normal blade depth for 4-ply is 11, then 11-10=1, so enter 1 for the Depth Bias.

Enter Depth Bias

  1. Select the desired Blade Cartridge Type Tab.

  2. Determine what the normal blade depth is for this cartridge.

  3. Subtract 10 from your Default Blade Depth.

    1. This may be a negative number.

  4. Enter the number into the Depth Bias field for this cartridge.

DepthBiasBladeDepth70800.png

  • If the Blade Depth is cut Too Deep, Decrease the Depth Bias.

  • If the Blade Depth is cut Too Shallow, Increase the Depth Bias.

  • No labels