Upgrade/Termination Hardware Return Instructions: CMC 5000

Owned by dani.simmonds
Last updated: Jun 07, 2024
3 min read

Please box up the following two items for return:

Please box up the following two items for return:

• Head
• Driver Pack
Please see the following removal instructions for each part.

Head Removal

Head Removal

  • Turn off the air.

  • Turn off the computer. Remove the blade.

  • Remove the Head hood (held with Phillips screws w/star washers) to make access to the Head Power Plug easier.

  • Unplug the Head power plug by gripping the white plug housing firmly (not the flexible cable), and gently rock it back and forth while pulling up.

Unplug Head Power Plug

  • Disconnect the air supply.

  • Disconnect the air line by unscrewing the airline connector.

Disconnect the Air Supply

  • Open the Head.

  • Remove the horizontal bolt from Head and right hinge on the trolley plate using the 9/64 Allen wrench.

  • If there is no horizontal bolt, remove small Allen screw to the right of right-hand Hinge.

Removing the Driver Pack

Removing the Driver Pack

Packaging up the Parts

Packaging up the Parts