Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 38 Current »

Change to the 45° Blade Cartridge

  • Your cartridge may look slightly different than displayed below depending upon what CMC model you have, but changing the cartridge uses the same process.

  • The 45 Degree black metal cartridge is labeled 45° on the end.

  • Older models may have black plastic cartridge.

  • Push blade cartridge release down to eject the current blade cartridge.

  • Turn the new cartridge over and reinsert into the head with the blade facing the CMC board and the notch on the back of the cartridge facing the head, until it clicks into place.

  • It can only be inserted one way.

  • No labels