Exterior Backup on Drops | |
|---|---|
Cutting from the Front will cut with the face of the mat toward the operator, and can be selected on the Cutting Preview. Configurations cut from the Back will only display the bevel type name with no further label; i.e., Normal Bevel. If you are cutting an element that must be applied to the front of the mat, such as a V-Groove or Pen design, any openings on that layer will also cut from the front and use the Front of Mat configuration item; i.e., Normal Bevel - Front of Mat. So if you are having problems with a Normal Bevel cut on the same layer as a V-Groove, make sure you select Normal Bevel-Front of Mat to edit the configurations for that opening. |   |
Drop Exterior Backup Too Long | |
|---|---|
The Exterior Backup controls where the Blade Plunges into the Matboard (not the Fallout) on the Exterior cuts of Drops. The Exterior Cut is where the Blade Plunges or Retracts from the Matboard (not the Fallout). If the Exterior Backup is cut Too Long, Decrease the Exterior Backup. The Exterior Backup field is marked with a Green Arrow on the Configuration screen and the Map illustration.  | |
Drop Exterior Backup Too Short | |
|---|---|
The Exterior Backup controls where the Blade Plunges into the Matboard (not the Fallout) on the Exterior cuts of Drops. The Exterior Cut is where the Blade Plunges or Retracts from the Matboard (not the Fallout). If the Exterior Backup is cut Too Short, Increase the Exterior Backup. The Exterior Backup field is marked with a Green Arrow on the Configuration screen and the Map illustration. | |