">

Click here to check out our new How To section">Click here to check out our new How To section

Skip to end of banner Go to start of banner

Depth Setting on Non-Blade Cartridges: Configurations Screen

Skip to end of metadata

Created by dani.simmonds, last modified on Oct 17, 2024

Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Depth Setting on Non-Blade Cartridges

If the Non-Blade Tool is too Deep, Decrease the Depth Setting.
If the Non-Blade Tool is too Shallow, Increase the Depth Setting.

The Depth Setting controls the Blade Depth for the Non-Blade Tools in the Configurations.
- First make sure that the physical Blade Depth setting is set correctly.
  - If Non-Blade Line is Too Deep, Decrease the /wiki/spaces/FrameShop8x/pages/1942502735.
  - If Non-Blade Line is Too Shallow, Increase the /wiki/spaces/FrameShop8x/pages/1942502735.

No labels