You are viewing an old version of this page. View the current version.
Compare with Current View Page History
« Previous Version 2 Next »
Select the Cut Outside function to cut the outside of the mat.
For Additional Information:
See Matboard Properties in the Design to turn on/off the Outside cut.
Select Options Menu > Cut Outside on the Cut Preview to cut the outside of the mat.
See /wiki/spaces/FrameShop8x/pages/1942506497 on the Cut Preview to turn on/off the Outside cut.
See Enable Outside Cut under Advanced Outside Options on the Cut Preview to toggle on/off the Outside cut.
See Cut Outside Using 90 Degree Tool under Set Advanced Options on the Cut Preview.
Default Settings:
See Cut the Outside: Editor Default Setting for the default settings for Cutting the Outside.
See Advanced Outside Settings: Cutting Default Setting for the default settings for the Advanced Options.
See Cut Mode: Cutting Default Setting for the default settings for the Cut Mode.
See 90 Degree Outside: Cutting Default Setting for the default settings for 90 Degree Outside.
See Tiling Defaults: Cutting Default Setting for the default settings for Tiling.
See Tiling Spacing: Cutting Default Setting for the default size for the Spacing between designs.
