Vertical Adjustment for Non-Blade Cartridges

Cartridges Involved
This Configuration element involves the following Cartridges. Note: Not all cartridges are available for all CMC models.

Vertical Adjustment for Non-Blade Cartridges Definition
Vertical Adjustment Definition The Vertical Adjustment defines the global Vertical placement of objects applied with the Non-Blade Tool Cartridges. Adjusting the Vertical Adjustment To adjust, click plus/minus on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved.

Select the Tool and Type
Make sure to select the desired tool from the Cartridge Tab (i.e., Deboss, Pen or Vinyl), Select the tool type you want to edit from the Current Bevel Type dropdown control (if applicable) before making adjustments.

Tool Line Too Far Up

If the Tool line is applied too far Up Vertically, Decrease the Vertical Adjustment.
See Vertical Adjustment for additional information.

Vertical Adjustment Definition

The Vertical Adjustment defines the global Vertical placement of objects applied with the Non-Blade Tool Cartridges.

If the Tool line is applied too far Down Vertically, Increase the Vertical Adjustment.
See Vertical Adjustment for additional information.

Vertical Adjustment Definition

The Vertical Adjustment defines the global Vertical placement of objects applied with the Non-Blade Tool Cartridges.

See Also: The Vertical Home defines the global Vertical placement of objects cut with the Blade Cartridges.