Add Crease Opening

The Crease Cartridge is used to apply Crease marks that are used to assist in folding the thicker finished Box.
This requires the Box Utility.

Default Settings: See Admin > Editor for the default settings for Box.

Crease Definition

The Crease Cartridge is used to apply Crease marks that are used to assist in folding the thicker finished Box.

See: Add Crease Opening Function

See: Crease Cartridge Configurations

For Additional Information: See Crease Properties to edit the individual proprietary adjustments available for the Crease.

Adding a Crease With an Object Selected
Click the object you want the Crease placed around. Click the Add Decorative Line button on the Openings tab. Click on Crease. Default Settings: See Admin > Editor for the default settings for Box.
The Crease Offset window will open. Enter the Offset Distance from the selected opening to place the Crease. Click OK. Default Settings: See Admin > Editor for the default settings for the default Deboss/Pen/V-Groove/Crease Distance under V-Groove Distance.
The Crease is placed around the opening at the Offset Distance specified. For Additional Information: See Crease Properties to edit the individual proprietary adjustments available for the Crease.

How Tosectionat:[HowTo...]">Check out our new How To section at: How To...