This FrameShop Online Help System is for an older Version of FrameShop.+">This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 8 Next »

Cut a Mat

These are the steps you will be going through when cutting a mat.

Cutting a Mat

The screen indicator will display if you are cutting from the back  or the front  of the mat.

Place the matboard on the CMC when cutting from the back or cutting from the front. 

Click the Cut button on the Cutting Preview screen.

If the motors on the CMC are disengaged, the user will be prompted to Align the Head. 

If the current layer uses a different blade cartridge or is a different mat thickness than the last layer cut, the user will be prompted to change the cartridge and/or blade depth. 

Change the Blade Cartridge and Blade Depth as prompted, and click OK. 

After the Head is Aligned, the desired Blade Cartridge inserted and the Blade Depth adjusted as prompted, the CMC will begin to cut. 

  • No labels