You are viewing an old version of this content. View the current version.
Compare with Current View Version History
« Previous Version 23
Set Optimized from the Cut Pattern dropdown control to cut Tiled mats Bi-Directionally, which will zig-zag back and forth when cutting the Outside on tiled mats on the CMC Z1, Z (9000z), 9000 and 8000+.
For Additional Information:
Select Options Menu > Cut Outside to cut the outside of the mat.
See /wiki/spaces/FrameShop8x/pages/1942506497 to turn on/off the Outside cut.
See Advanced Outside Options: Enable Outside Cut to turn on/off the Outside cut.
Default Settings:
See Admin > Editor for the default settings for Cutting the Outside.
See Admin > Cutting for the default settings for the Advanced Options.
See Admin > Cutting for the default settings for the Cut Mode.
See Admin > Cutting for the default settings for 90 Degree Outside.
See Admin > Cutting for the default settings for Tiling.
See Admin > Cutting for the default size for the Spacing between designs.
Click the Set Advanced Options button to access the Advanced Outside Options.
Select Optimized from the Cut Pattern dropdown control.
Click OK.
It will cut the Outsides of Tiled mats in a Bi-Directional, zig-zag fashion.
See Stairstep vs. Optimized vs. Unidirectional for information on the outside cutting differences between the different Cut Patterns.
