">

Skip to end of banner Go to start of banner

Outside Cut Off

Skip to end of metadata

Created by dani.simmonds , last modified on Apr 15, 2024

Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

Not Cutting the Outside

Select Off from the Outside Cut Options dropdown control to not cut the Outside of the mat on the CMC Z1, Z (9000z), 9000 and 8000+.
The Outside of the mat will not be cut.
Optionally, select one of the other Outside Cut Options to cut the Outside of the mat.

For Additional Information: Select Options Menu > Cut Outside to cut the outside of the mat.

For Additional Information: See /wiki/spaces/FrameShop8x/pages/1942506497 to turn on/off the Outside cut.

For Additional Information: See Advanced Outside Options: Enable Outside Cut to turn on/off the Outside cut for the CMC Z1, Z(9000z), 9000 and 8000+.

Default Settings: See Admin > Editor for the default settings for Cutting the Outside.

Default Settings: See Admin > Cutting for the default settings for the Advanced Options.

Default Settings: See Admin > Cutting for the default settings for the Cut Mode.

No labels