">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 32 Next »

Add Crease Opening

  • Default Settings: See Admin > Editor for the default settings for Box.

 Crease Definition

The Crease Cartridge is used to apply Crease marks that are used to assist in folding the thicker finished Box.

CreaseCartridgeConfig70800.jpg

See: Add Crease Opening Function

See: Crease Cartridge Configurations

AddCreaseCartridge70800.png

  • The Crease is placed on the Editor.

  • For Additional Information: See Crease Properties to edit the individual proprietary adjustments available for the Crease.

Adding a Crease With an Object Selected

  • Default Settings: See Admin > Editor for the default settings for Box.

AddCreaseCartridge70800.png

  • The Crease Offset window will open.

  • Enter the Offset Distance from the selected opening to place the Crease.

  • Click OK.

  • Default Settings: See Admin > Editor for the default settings for the default Deboss/Pen/V-Groove/Crease Distance under V-Groove Distance.

  • The Crease is placed around the opening at the Offset Distance specified.

  • For Additional Information: See Crease Properties to edit the individual proprietary adjustments available for the Crease.

  • No labels