This FrameShop Online Help System is for an older Version of FrameShop.+">This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 8 Current »

Placing Matboard When Cutting from the Front

When the Cutting Preview screen indicates that the current layer is to be cut from the front of the mat, this also determines how to place the matboard onto the CMC.

Have two layers of adequate size of disposable matboard under mat to be cut; a layer can be temporarily removed when cutting thicker matboard.

Place the matboard into the left corner of the CMC, making sure that the matboard nestles tightly into the horizontal and vertical clamps.

When cutting from the front, make sure the front of the matboard is facing the user. 

  • No labels